iXP1 cable connector adapters are interchangeable with the XP1Power Cable. iXP1 cable connector adapters will be released for most SmartPhones, CellPhones, gaming devices, PDA's, camera's, GPS, Wireless headsets and MP3 players. The iXP1 cable connectors are high-quality connectors. We currently provide a wide selection of models. A listed of connectors for the XP1Power include the Apple, Fujitsu, Motorola, Nokia, Qualcomm, Sanyo, Sony, Ericsson, Audiovox, Kyocera, NEC, Panasonic, Sagem, Siemens, Uniden Ericsson, Nextel, Philips, Samsung, and LG

Interchange Connectors with the XP1-5000 Universal Power Cable to Power All Of Your Devices - Click Here for iXP1 System Information

 

iXP1 Cable Connector Adapter - Mini-USB type A connector

Devices with Mini-USB type B connector

  • BlackBerry: 8100 Pearl, 8300 Curve, 8800 Pearl, 8820
  • HTC: Advantage, MTeoR, P3300, P3400, P3600, P4350, S620, S710, Touch, TyTN, TyTN II
  • i-mate: JAMin, JASJAM, JASJAR, K-JAM, SP JAS, SP5, SP5m, SPL
  • Motorola: A780, KRZR K1, KRZR K3, L2, L6, MOTOFONE F3, PEBL U6, RAZR maxx, RAZR V3, RAZR V3xx, RIZR, RIZR Z6, RIZR Z8, SLVR L7, V220, V230, V360, V3i, V3x
  • Nokia: 2630, 2760, 3109 Classic, 3110 Classic, 3500 Classic, 5200, 5300, 6110 Navigator, 6300, 7500 Prism, E90, N76, N91, N95
  • O2: XDA Argon, XDA Exec, XDA Graphite, XDA IQ, XDA Mini S, XDA Orbit, XDA Stealth, XDA Trion, XDA Zinc
  • Orange: M3000, M3100, M500, M5000, M700, SPV C100, SPV C700, SPV E650, SPV M600
  • Qtek: 8300, 8310, 8600, 9000, 9100, 9600, S100, S110, S200
  • Sony: PSP
  • T-Mobile: Ameo, MDA Compact, MDA Compact II, MDA Compact III, MDA Mail, MDA Pro, MDA Touch, MDA Vario, MDA Vario II
  • Vodafone: v1415, v1605, v1640, VPA Compact

Connector pinout for: Mini-USB of Blackberry 6210, 6220, 6230, 6280, 6510, 7100(g, i, r, t, v, x, t), 7130(e, c, g), 7210, 7230, 7250, 7270, 7280, 7290, 7510, 7520, 8700(c, f, g, r, v); Creative Zen Micro, Zen Micro Photo, Zen Neon and other PDA devices

 

 

iXP1 Cable Connector Adapter - Micro-USB type A connector

Devices with Micro -USB type B connector

The micro-USB will slow charge at a rate of 500mA through a powered USB computer port or network hub. This charging rate is faster through the use of an AC adapter. The new UCS standard has a target date of January, 2012. The micro-USB charger will be compatible with future mobile phones USB 3.0 micro-USB receptacle.

 

 

Five (5) Pin Mini-USB Female Jack

Comparison Below Between Standard, Mini-USB and Micro-USB

 

Pin-Outs for Mini-USB and Micro-USB Jack

Pin Name Cable Color Description
1
VCC
Red
+5 VDC
2
D-
White
Data -
3
D+
Green
Data +
X
    This pin may be connected to GND for cable detection in some cases.
4
GND
Black
  Ground

 

 

iXP1 Cable Connector Adapter - Apple iPod - iPhone

Connector pinout for: Apple iPod - iPhone dock

The Apple iPhone/iPod 30 pin connector is used on the dock station for iPod and iPhone and on many of the iPod and iPhone models. This connector is available in all Apple iPod MP3 player (iPod 1G, 2G, 3G, 4G, 5G and Nano).

This connector is used on iPod (starting from 3rd generation) and iPhone. It is used to connect the iPod or iPhone to various devices: PC (via USB or FireWire IEEE1394), audio amplifier, serial device (controlled via the Apple Accessory Protocol).

Pin Signal Description
1 GND Ground (-), internally connected with Pin 2 on iPod motherboard
2 GND Audio and Video ground (-), internally connected with Pin 2 on iPod motherboard
3 Right Line Out - R (+) (Audio output, right channel)
4 Left Line Out - L(+) (Audio output, left channel)
5 Right In Line In - R (+)
6 Left In Line In - L (+)
8 Video Out Composite video output (only when the slideshow mode is active on iPod Photo)
9 S-Video Chrominance output for iPod Color, Photo only
10 S-Video Luminance output for iPod Color, Photo only
11 GND Serial GND
12 Tx iPod sending line, Serial TxD
13 Rx iPod receiving line, Serial RxD
14 NC  
15 GND Ground (-), internally connected with pin 16 on iPod motherboard
16 GND USB GND (-), internally connected with pin 15 on iPod motherboard
17 NC  
18 3.3V 3.3V Power (+)
Stepped up to provide +5 VDC to USB on iPod Camera Connector.
If iPod is put to sleep while Camera Connector is present, +5 VDC at this pin slowly drains back to 0 VDC.
19,20 +12V Firewire Power 12 VDC (+)
21 Accessory Indicator/Serial enable Different resistances indicate accessory type:
  • 1KOhm - iPod docking station, beeps when connected
  • 10KOhm - Takes some iPods into photo import mode
  • 68kOhm - makes iPhone 3g send audio through line-out without any messages
  • 500KOhm - related to serial communication / used to enable serial communications Used in Dension Ice Link Plus car interface
  • 1MOhm - Belkin auto adaptor, iPod shuts down automatically when power disconnected Connecting pin 21 to ground with a 1MOhm resistor does stop the iPod when power (i.e. Firewire-12V) is cut. Looks to be that when this pin is grounded it closes a switch so that on loss of power the IPod shuts off. Dock has the same Resistor.
22 TPA (-) FireWire Data TPA (-)
23 5 VDC (+) USB Power 5 VDC (+)
24 TPA (+) FireWire Data TPA (+)
25 Data (-) USB Data (-)
26 TPB (-) FireWire Data TPB (-)
27 Data (+) USB Data (+)
Pins 25 and 27 may be used in different manner. To force the iPod 5G to charge in any case, when 'USB Power 5 VDC' (pin 23) is fed, 25 must be connected to 5V through a 10KOhm resistor, and 27 must be connected to the Ground (for example: pin 1) with a 10KOhm resistor.
28 TPB (+) FireWire Data TPB (+)
29,30 GND FireWire Ground (-)

 

iXP1 Cable Connector Adapter - Other Connectors

Other Cellphone, SmartPhones and MP3 Player Connectors


Most Cell Phone and MP3 player Connectors are manufactured for the XP1Power cable. The XP1Power connectors are high-quality connectors. We provide a wide selection of models. A listed of connectors for the XP1Power include the Apple, Fujitsu, Motorola, Nokia, Qualcomm, Sanyo, Sony, Ericsson, Audiovox, Kyocera, NEC, Panasonic, Sagem, Siemens, Uniden Ericsson, Nextel, Philips, Samsung, and LG