SURFACE MOUNT RJ/LED CONNECTOR JACKS
SURFACE MOUNT Modular Jacks are available in shielded and unshielded single and dual-port varieties. These jacks are tape and reel packaged for automatic pick and place equipment.
XMULTIPLE Surface Mount LED Modular Jacks are designed under U.S. Patent 4,978,317 consisting of single or multi-port jacks.
The patented LEDs are integrated within the housing of the modular jacks with a one piece construction assuring proper contact of LED pins to the printed circuit board.
The LED functions are transmit/receive, line status and collisions which can easily be viewed for each port. All jacks are flame retardant. The PC board retention will not dislodge from the PC board when subjected to 1 lb. pull before soldering and 10 lb. pull after soldering.
The XMULTIPLE XRJS series is designed for SMT electronic assembly with the most sophisticated SMT equipment. The XRJS Surface mount LED modular jacks are tape and reel packaged for automatic pick and place SMT equipment. A picture of the tape and reel packaging is shown below. This tape and reel packaging is compatible with all SMT tape and reel equipment.
LED Surface Mount Modular Jacks integrated with electronic components. Integrated Ethernet magnetic components are available to a customers specifications.
Material & Finish
Housing - High temperature Nylon,
Black, UL 94V-0 rated
Contact - 0.14 [.036] Phosphor bronze,
plated 0.000050 [.00127] gold in
localized area and 0.000150 [.00381] tin-
Lead on solder tails, over 0.000050
[.00127] nickel underplate
Shield - 0.25 [.010] copper alloy, tin-lead
plated
|
Low Profile Surface Mount Jack maintaining compact form requiring less PCB space Contact pins are located on the back of RJ housing for assembly of multiple jacks side by side Compact design for devices with limited height requirements Retention at 10lb. pull after assembly soldering Unshielded and shielded versions in popular size configurations. Shielded jacks provide grounding through panel and PC board Lower labor cost during assembly of PCB Designed for Direct Surface Mount to PCB with gold plated contacts for lower cost Compatible with vapor phase and IR reflow Meets or exceeds FCC Part 68 rules and regulations with standard PC board footprints
|
Electrical
Current Rating - 1.5 amp max. at 25°C
Voltage Rating - 150 VAC max.
Dielectric Withstanding Voltage –
1000 VAC, RMS, 60 Hz, 1 min.
Insulation Resistance – 500 megohms
min.
Shielding Effectiveness - 20dB min.,
10 to 200 MHz
Mechanical
Durability - 750 mating cycles
Mating/Unmating Forces - 4.5 lbs. Max
Operating Temperature - -40°C to 70°C