 |
|
|
Product Details for XMK-5911-01-04-305-H-L
RJ45, Shielded Connector with Ferrite
RoHS Compliant
Status: Active
Product Highlights:
- Shield Type -Shielded
- With Integrated Ferrite
- No LEDs
- Mount Style - Right Angle Mount
- Available in many housing colors
- Packaging -80 units per Tray, 640 units per box (carton)
- Carton Weight - 5.5 kgs Gross Weight
- Carton Size - 35x25x26 cm
Description:
This Xmultiple XMK series connectors have integrated ferrites. Ferrites are similar to inductors in some ways but work especially in an area that is parasitic for general purpose inductors. They essentially act as a high impedance, or "resistor" to high frequency EMI/RFI electronic noise. The absorbed energy is converted to heat and dissipated by the ferrite, but only in extreme cases will the heat be noticeable.
Ferrites are one of the simplest and least expensive types of interference filters to install on preexisting electronic cabling. For a simple ferrite ring, the wire is simply wrapped around the core through the center typically 5 or 7 times. Clamp-on cores are also available, which can be attached without wrapping the wire at all.
Electrical Characteristics
Current Rating 1.5 A Max. Durability 750 to 1000 Mating Cycles Voltage Rating 150 VAC Max. Mating Force 5 Pounds Max. Insulation Resistance 500 M£[ (Ohm) Min. Unmating Force 5 Pounds Max. Delectric Withstanding Voltage 1000 VAC for 1 minute between adjacent contacts 1500 VAC for 1 minute between shielding and contacts Termination Resistnace 40m£[ (Ohm) Max. Inital
50m£[ (Ohm) Max. Final
Material Copper Alloy Material PBT - Optional Nylon for High Temperature Plating Nickel Housing Flammability Rating UL 94V-0 Number of PCB Ground Tabs 2 Standard Flanged With or Without Ground Pin Position (mm) After Peg 3.43 Standard
Material Phosphor-Bronze Protocol Type None Contact Area Plating Hard Gold or Gold Platting Circuit Type None Solder Area Plating Tin
